Septic Pumping During COVID-19
Septic pumping is one of the most fundamental things that you can do to keep your septic system functioning properly. With residents spending more time at home to abide by local COVID-19 shelter-in place orders, it’s important to be conscious of the increased use of your residential septic system. Household members being home more contributes to the production of more waste water along with increased home activities that impact your septic system.
As you increase use of your septic system, you’ll need to increase the frequency in which your septic system is serviced. The good news is that waste management services have been deemed essential by Federal and State governments and septic service can be completed without contact, abiding by social distancing practices.
As a homeowner, proper septic management practices are essential to help keep your septic system in peak operating condition. Here are some key things you should understand about your septic system and take into consideration during these high use times.
WHAT IS A SEPTIC SYSTEM?
A subsurface sewage disposal system, commonly known as a septic system, consists of two main components: the septic tank, also known as the treatment tank, and the drainage area, often referred to as the leach field. The system also includes a main sewer line, which connects all plumbing fixtures to the septic tank, as well as a distribution box that connects
the septic tank to the drainage field. The septic tank is buried approximately 10 to 15 feet from the dwelling.
The purpose of a septic system is to treat and dispose of wastewater generated by the occupants. When properly installed and adequately maintained, septic systems are more
economical than sanitary sewers and just as efficient.
HOW YOUR SEPTIC SYSTEM WORKS
All wastewater generated from the dwelling enters the septic tank where primary treatment occurs. Anaerobic bacteria (bacteria found in environments without oxygen) thrive in the septic tank where they organically break down solids, creating sludge. Lighter materials such as grease and soap float to the top of the tank and form a layer called scum. This simple settling process allows virtually all of the wastewater (effluent) to flow out of the septic tank free of grease, soap and solids. It is important to remember that the septic tank inlet and outlet pipes are near the top of the tank. Thus, the septic tank always appears full.
The relatively clear wastewater exits the septic tank outlet and flows into the distribution box (D-box). The purpose of the distribution box is to evenly distribute the wastewater flow throughout the drainage field. Once in the drainage field, the wastewater passes through perforated lateral pipes, a layer of crushed stone and finally through several feet of unsaturated soil. As the treated wastewater travels through the soil, bacteria die off and the water is purified.
SEPTIC SYSTEM MAINTENANCE
Periodic maintenance is the key to extending the life of your septic system and preventing costly repairs. When the combined depth of the sludge and scum layers equal one-third of the septic tank capacity, the tank should be pumped. The accumulated sludge and scum from the septic tanks should be pumped a minimum of every three years, or more frequently if your household consists of four people or more.
A general rule for locating your septic tank is to probe with a shale bar or steel rod 10 to 15 feet from where the main sewer line exits the foundation of the dwelling. Patience and determination will help you locate the outer edges of the tank. Once located, dig a hole toward the center to expose the main cover only, usually 24" in diameter.
Russell Reid, A United Site Services Company offers septic pumping services in the greater Tri-State area. Schedule septic pumping services today or call 1.800.356.4468 to speak with a customer service representative today!
